Product introduction： The main chemical components： P2O5≥28%, MgO＜2.0%, R2O3＜4%, SiO2:10%-15%. The product belongs to the silicate type and has a high content of sesquioxide. It also contains relatively high levels of silicon. It is mainly found in the form of lumpy ore. The arsenic content is below 30 ppm, and the levels of heavy metals such as lead, mercury, and chromium are less than 20 ppm. Product application: It is suitable for use as raw material in the production of yellow phosphorus....
Product introduction. The main chemical components： P2O5 ≥ 29%, MgO<%, R2O3<4.5%, SiO2<13%, and organic carbon content<1.5%. The product belongs to the carbonate type and is composed of dense blocky phosphorite and mudstone phosphorite. It has a relatively high content of sesquioxide. Product application: It is suitable for the production of dicalcium phosphate and monocalcium phosphate.
Product introduction. The main chemical components are P2O5≥ 28%, MgO between 1.5%-2.5%, R2O3<2%, SiO2<12%. The product belongs to the carbonate type and has good reaction activity. It has a relatively low content of sesquioxide and a high water-soluble phosphorus content. The arsenic content is below 20 ppm, and the levels of heavy metals such as lead, mercury, and chromium are less than 10 ppm. Product application: It is suitable for the production of monocalcium phosphate, dicalcium phosphate, and Monoammonium phosphate(MAP)....
Product introduction. The main chemical components: P2O5 ≥ 23%, MgO<1.5%, sesquioxides (iron, and aluminum)<6%, R2O3>6%, SiO2>18%. The product is a flotation tailings of the silicate type and has a high content of sesquioxides and silica. The arsenic content is below 30 ppm, and the levels of heavy metals such as lead, mercury, and chromium are less than 20 ppm. Product application: It is suitable for the production of monocalcium phosphate and for further processing into yellow phosphorus after pelletization....
Product introduction： The main chemical components: P2O5 between 24%-26%, MgO<1%, sesquioxides (iron, and aluminum) <5%, CaO ≥ 29%, and SiO2 of 25%-28%. The product is produced from the fine-graded tailing powder after pelletization of A-layer ore. Product application: It is suitable for the production of yellow phosphorus.
